简介

In this guide, we will go over the steps to remove the motherboard from a Nikon Coolpix S800c.

  1. Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).
    • Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

    添加评论

  2. Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.
    • Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

    添加评论

    • Unscrew all 6 visible screws that secure the motherboard into place using a Phillips head screwdriver (found in iFixit tool kit).

    添加评论

    • Pull the shown panel off of the motherboard to expose the Image sensor connection

    添加评论

    • Lift tab up to remove the Image sensor connection strip.

    添加评论

    • Pull the gray panels back to allow the hidden micro usb and hdmi insert connectors to come free.

      • Use a Metal Spudger to help with the process to get these connectors free from the frame.

    添加评论

    • Using a Metal Spudger, lift the motherboard up from the body of the camera.

    添加评论

    • Pull the motherboard off of the main body of the camera.

    添加评论

结论

Soldered wires attaching the motherboard to the camera body will need to be disconnected at the motherboard-end and the new wires on the replacement motherboard will need to be soldered on. To reassemble your device, follow these instructions in reverse order.

Kenneth Huynh

于2018年01月30日注册

133 信誉积分

撰写一个指南

团队

Baylor, Team S2-G6, Johnson Spring 2018 Baylor, Team S2-G6, Johnson Spring 2018 的会员

BU-JOHNSON-S18S2G6

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 46