Skip to main content

介绍

In this guide, we will give you step-by-step instructions on how to detach the LCD screen so that it can be replaced or repaired.

配件

没有特定配件。

  1. Remove the memory stick from the camera.
    • Remove the memory stick from the camera.

    • Remove the batteries from the camera.

  2. Remove all six 4.3mm silver screws along the perimeter of the camera using the Phillips #00 screwdriver. There is one screw hidden under the AV cover that also needs to be removed.
    • Remove all six 4.3mm silver screws along the perimeter of the camera using the Phillips #00 screwdriver.

    • There is one screw hidden under the AV cover that also needs to be removed.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Pry the back cover from the left side of the camera. Remove the cover gently.
    • Pry the back cover from the left side of the camera. Remove the cover gently.

  5. CAUTION! This is where energy for the flash is stored.  Even with batteries removed, if you touch these connections, you can be shocked, depending on if the flash capacitor has a stored charge. It may not have a stored charge, but work around this assuming it does.
    • CAUTION! This is where energy for the flash is stored. Even with batteries removed, if you touch these connections, you can be shocked, depending on if the flash capacitor has a stored charge. It may not have a stored charge, but work around this assuming it does.

    • Newer cameras of descent quality usually have a bleeder resistor to drain the flash capacitor. This may not work anymore and the flash capacitor may still have a charge.

  6. Remove the tape on the right side of the LCD screen.
    • Remove the tape on the right side of the LCD screen.

    • Gently lift the LCD screen from its base.

    • Don't tug on the screen because it is still connected to the logic board.

  7. Lift the black latch connecting the LCD ribbon to the logic board.
    • Lift the black latch connecting the LCD ribbon to the logic board.

    • Gently pull the LCD ribbon out.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Nonny

于2010年10月11日注册

210 Reputation

创作了2篇指南

Team

Cal Poly, Team 9-23, Regan Fall 2010 Cal Poly, Team 9-23, Regan Fall 2010 的会员

CPSU-REGAN-F10S9G23

4 名成员

创作了5篇指南

4 Comments

Good work! Appreciate it.

Oasis World - 回复

I need a new LCD screen replacement. A link to buy a new one?

William Pullman - 回复

Where can I get a replacement LCD screen for a Nikon L18 camera?

William Pullman - 回复

I found one for my Nikon Coolpix L18 on eBay.

Mark Fraylick -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 7

All Time: 6,715