简介

This guide will walk you through the necessary steps to access and remove the LCD screen in the Nikon Coolpix E5700.

配件

无需配件。

Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.
  • Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.

  • Open the battery door.

添加评论

Pull the battery out of the E5700.
  • Pull the battery out of the E5700.

  • It may be necessary to wiggle the battery while pulling to free it from its pocket in the case.

添加评论

  • Remove two Phillips screws (3.4 mm) located on the left side of the screen.

添加评论

  • Remove two Phillips screws (3.4 mm) located on the right side of the screens.

添加评论

  • Remove back plastic monitor cover.

添加评论

  • Remove the Phillips screw on the top right side of the screen.

添加评论

  • Carefully unplug the grey bundle of wires in the white housing.

添加评论

  • Carefully unplug the small pink and wires in the grey housing.

添加评论

  • Remove the two Phillips screws on the left side of the screen.

添加评论

  • Remove the metal bar on the left side of the screen.

  • Remove the screen from the front plastic housing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kyle Sitton

于2011年04月17日注册

333 信誉积分

创作了7篇指南

团队

Cal Poly, Team 24-58, Amido Spring 2011 Cal Poly, Team 24-58, Amido Spring 2011 的会员

CPSU-AMIDO-S11S24G58

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 3

总计 2,176