简介

This guide will outline how to remove a dead battery, as well as how to properly install a new one.

工具

无需工具。

  • At the top of the camera, turn the Mode dial to OFF.

添加评论

Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.
  • Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.

  • To open the battery compartment, push the latch underneath the word BATTERY to the left.

添加评论

Lift the battery compartment cover and remove the old battery.
  • Lift the battery compartment cover and remove the old battery.

添加评论

Insert the new battery as shown on the underside of the compartment lid.
  • Insert the new battery as shown on the underside of the compartment lid.

添加评论

Flip the battery compartment lid closed and push the latch to the right.
  • Flip the battery compartment lid closed and push the latch to the right.

添加评论

  • Flip the camera so that the bottom rests on the table.

  • Turn the Mode dial to [A] to verify that the control panel shows a full power indicator.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Cory Layman

于2011年10月04日注册

89 信誉积分

创作了3篇指南

团队

UW Stout, Team 1-5, Zhou Fall 2011 UW Stout, Team 1-5, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G5

5 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 5

总计 1,361