简介

This guide is to be used to install the plastic LCD screen cover in the case that it becomes damaged or no longer functions properly due to overuse. A Phillips screwdriver will be needed to complete this installation.

配件

无需配件。

Remove wrist strap by unknotting the strap.
  • Remove wrist strap by unknotting the strap.

添加评论

Open SD/Battery cover.
  • Open SD/Battery cover.

添加评论

  • Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.

添加评论

  • Pull the silver side panels on each side.

添加评论

  • On the right side of the camera (that contains the wrist strap loop), use the screwdriver to remove the two screws holding the backplate in place.

    • Repeat this step for the left side.

添加评论

  • Pull the back silver faceplate to separate it from the rest of the camera.

添加评论

  • Press lightly on the outer surface of the plastic LCD screen cover in each corner.

    • The plastic LCD screen cover should pop out of the back plate.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Josh Miller

于2013年03月11日注册

84 信誉积分

创作了3篇指南

团队

Clemson, Team 12-5, Benson Spring 2013 Clemson, Team 12-5, Benson Spring 2013 的会员

CLEM-BENSON-S13S12G5

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 263