简介

This guide is to be used to install the back cover in the event that it becomes damaged. A Phillips screwdriver will be needed to complete this installation.

配件

无需配件。

  1. Remove wrist strap by unknotting the strap.
    • Remove wrist strap by unknotting the strap.

  2. Open SD/Battery cover.
    • Open SD/Battery cover.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver. Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.
    • Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.

  5. Pull the silver side panels on each side. Pull the silver side panels on each side.
    • Pull the silver side panels on each side.

  6. On the right side of the camera (that contains the wrist strap loop), use the  screwdriver to remove the two screws holding the backplate in place. Repeat this step for the left side.
    • On the right side of the camera (that contains the wrist strap loop), use the screwdriver to remove the two screws holding the backplate in place.

      • Repeat this step for the left side.

  7. Pull the back silver faceplate to separate it from the rest of the camera. Pull the back silver faceplate to separate it from the rest of the camera.
    • Pull the back silver faceplate to separate it from the rest of the camera.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Patty Richeson

于2013年03月11日注册

75 信誉积分

创作了4篇指南

团队

Clemson, Team 12-5, Benson Spring 2013 Clemson, Team 12-5, Benson Spring 2013 的会员

CLEM-BENSON-S13S12G5

4 名成员

创作了7篇指南

浏览统计数据:

过去的24小时: 3

过去的7天: 4

过去的30天: 4

总计 395