/
我的工作台

快速访问设备的指南、配件和论坛

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
注册
登录
加入世界上最大的维修社区
Nikon COOLPIX S610c LCD Replacement

Nikon COOLPIX S610c LCD Replacement

Kevin Backers

Kevin Backers 和 3 其他贡献者

最后更新于 August 4, 2020

30分钟
中等
动态照片拍摄
步骤精简

简介

转到步骤 1

If your screen has stopped working or needs to be replaced for some other reason, follow this guide to remove your current screen.

你所需要的

工具

  • Phillips #00 Screwdriver
    Phillips #00 Screwdriver
  • Spudger
    Spudger

  1. Nikon COOLPIX S610c LCD Replacement, Battery: 步骤 1 中的图像 1，1

    • On the bottom right of the camera, locate the battery flap switch.

    编辑

  2. Nikon COOLPIX S610c LCD Replacement: 步骤 2 中的图像 1，1

    • Move this switch to the right so the battery flap can flip open.

    编辑

  3. Nikon COOLPIX S610c LCD Replacement: 步骤 3 中的图像 1，1

    • Slide the orange switch to the right as shown. Now the battery can be pulled out. Reverse these steps to re-install.

    编辑

  4. Nikon COOLPIX S610c LCD Replacement, Rear Casing: 步骤 4 中的图像 1，1

    • Remove the three 3x3mm screws attached to the rear casing.

    编辑

  6. Nikon COOLPIX S610c LCD Replacement: 步骤 5 中的图像 1，1

    • The panel can be identified by the wifi logo on its upper half on the camera's side.

    • Remove the 5x3mm screw holding down the panel on the side closest to the lens.

    编辑

  7. Nikon COOLPIX S610c LCD Replacement: 步骤 6 中的图像 1，1

    • Pry the panel off from the bottom using your fingernail.

    编辑

  8. Nikon COOLPIX S610c LCD Replacement: 步骤 7 中的图像 1，1

    • Remove the 3x2mm screw underneath the panel near the top of the camera.

    编辑

  9. Nikon COOLPIX S610c LCD Replacement: 步骤 8 中的图像 1，2 Nikon COOLPIX S610c LCD Replacement: 步骤 8 中的图像 2，2

    • Remove the 4x3mm on the opposite side near the selector wheel.

    • Remove the 2x2mm and 3x2mm screws underneath the a/v flap.

    编辑

  10. Nikon COOLPIX S610c LCD Replacement: 步骤 9 中的图像 1，2 Nikon COOLPIX S610c LCD Replacement: 步骤 9 中的图像 2，2

    • Pry the back panel away from the body of the camera, using the space you just opened up.

    • Be careful not to damage the ribbon cable on the opposite end of the camera.

    • A small piece of the frame of the camera may fall off, but it can be easily put back into place during reassembly.

    编辑

  11. Nikon COOLPIX S610c LCD Replacement: 步骤 10 中的图像 1，2 Nikon COOLPIX S610c LCD Replacement: 步骤 10 中的图像 2，2

    • Pry up the plastic ribbon connectors on the body of the camera to release the ribbon cables.

    • The center connector is detached by flipping the black latch up and away from the center of the camera.

    • The smaller connector is detached by flipping the tan latch up and away from the edge of the camera.

    编辑

  12. Nikon COOLPIX S610c LCD Replacement, LCD: 步骤 11 中的图像 1，2 Nikon COOLPIX S610c LCD Replacement, LCD: 步骤 11 中的图像 2，2

    • Pry the display from the rear casing using a spudger.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Kevin Backers

于01/26/12注册

301 声望

创作了4篇指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team 9-5, Regan Winter 2012 Cal Poly, Team 9-5, Regan Winter 2012 的会员

CPSU-REGAN-W12S9G5

5 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 9

总计 605