跳转到主内容

Nikon COOLPIX P7700 Back Casing Replacement

你所需要的

  1. Nikon COOLPIX P7700 Back Casing Replacement, Back Casing: 步骤 1 中的图像 1,2 Nikon COOLPIX P7700 Back Casing Replacement, Back Casing: 步骤 1 中的图像 2,2
    • Turn camera to the left side and remove the two 4.3 mm black side screws using the Phillips #00 screwdriver.

    • Remove the side panel.

  2. Nikon COOLPIX P7700 Back Casing Replacement: 步骤 2 中的图像 1,1
    • Open the touch screen, and remove the three 4.3 mm black screws inside using the Phillips #00 screwdriver.

  3. Nikon COOLPIX P7700 Back Casing Replacement: 步骤 3 中的图像 1,1
    • Remove the 4.3 mm black screw on top of the camera, right above where the screen folds out. Use the Phillips #00 screwdriver.

  4. Nikon COOLPIX P7700 Back Casing Replacement: 步骤 4 中的图像 1,1
    • Remove the two 4.3 mm black screws on the right side of the camera using the Phillips #00 screwdriver.

  5. Nikon COOLPIX P7700 Back Casing Replacement: 步骤 5 中的图像 1,1
    • Remove the 4.3 mm black screws on the bottom of the camera using the Phillips #00 screwdriver.

  6. Nikon COOLPIX P7700 Back Casing Replacement: 步骤 6 中的图像 1,2 Nikon COOLPIX P7700 Back Casing Replacement: 步骤 6 中的图像 2,2
    • Begin separating the camera into two parts.

    • It is okay to remove the orange ribbon. This will be easily put back into place when re-assembling.

  7. Nikon COOLPIX P7700 Back Casing Replacement: 步骤 7 中的图像 1,1
    • Remove the back casing.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Dustin Wahl

于03/11/15注册

775 声望

创作了4篇指南

团队

Colorado Springs, Team 2-7, Panko Spring 2015 Colorado Springs, Team 2-7, Panko Spring 2015 的会员

UCCS-PANKO-S15S2G7

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 1

过去 30 天: 11

总计 1,766