跳转到主内容

简介

Here we are going to show you how to replace the O-Ring on the Nikon 1 AW 1 Camera.

配件

没有特定配件。

  1. Press and hold the lens release button,  twist the lens in a clockwise motion, then pull it off of the camera. Press and hold the lens release button,  twist the lens in a clockwise motion, then pull it off of the camera.
    • Press and hold the lens release button, twist the lens in a clockwise motion, then pull it off of the camera.

  2. Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out. Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out. Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out.
    • Squeeze the O-ring under the lens support to push out the O-ring. Use a plastic opening tool to get under the O-ring, and slowly work around the metal lens support to pull the O-ring completely out.

结论

To reassemble your device, follow these instructions in reverse order.

Lester Rodriguez Piti

于2016年10月04日注册

364 信誉积分

创作了3篇指南

团队

USF Tampa, Team 3-4, Sullivan Fall 2016 USF Tampa, Team 3-4, Sullivan Fall 2016 的会员

USFT-SULLIVAN-F16S3G4

4 名成员

创作了6篇指南

Hello, it appears that Nikon has discontinued the Nikon 1 AW1 WP-O2000 O-ring. Can anyone suggest a non-OEM alternatives?

Justin Wade Thornton - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 8

过去的30天: 12

总计 334