跳转到主内容

Nike SportWatch GPS Front Panel Replacement

你所需要的

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: 步骤 1 中的图像 1,1
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: 步骤 2 中的图像 1,1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: 步骤 3 中的图像 1,1
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: 步骤 4 中的图像 1,1
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: 步骤 5 中的图像 1,1
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: 步骤 6 中的图像 1,1
    • Push the panel out from the back of the screen, using your fingers.

结论

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

于10/22/15注册

678 声望

创作了4篇指南

团队

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 的会员

UMASSD-GULBRANDSEN-F15S5G8

3 名成员

创作了5篇指南

一条评论

Where I can find the replacement glass? regards

Erick Sobreiro - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 5

总计 1,258