跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This repair might be needed if your NikePlus Sportband screen has been damaged due to being drop or stepping on the device.

配件

没有特定配件。

  1. To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband. To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.
    • To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.

  2. Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart. Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.
    • Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.

  3. Manta 螺丝刀工具包

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  4. After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing. After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.
    • After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.

  5. Use the metal tweezers to pry the screen casing from the body of the device. The screen casing is fastened to the body  of the device by four clips located in each corner of the casing. The screen casing is fastened to the body  of the device by four clips located in each corner of the casing.
    • Use the metal tweezers to pry the screen casing from the body of the device.

    • The screen casing is fastened to the body of the device by four clips located in each corner of the casing.

  6. Flip the body of the device over so that the screen is now on the bottom. The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.
    • Flip the body of the device over so that the screen is now on the bottom.

    • The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.

    • Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.

  7. Flip the body of the device back over so that the screen is facing up. Using the tweezers, gently lift the screen from body of the device. Using the tweezers, gently lift the screen from body of the device.
    • Flip the body of the device back over so that the screen is facing up.

    • Using the tweezers, gently lift the screen from body of the device.

结论

To reassemble your device, follow these instructions in reverse order.

Daniel Burtner

于2016年02月15日注册

101 信誉积分

撰写一个指南

团队

IUPUI, Team 9-9, Wilson Spring 2016 IUPUI, Team 9-9, Wilson Spring 2016 的会员

IUPUI-WILSON-S16S9G9

5 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 150