跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Nexus Q Ball Bearing Ring Replacement

你所需要的

  1. Nexus Q Ball Bearing Ring Replacement, Ball Bearing Ring: 步骤 1 中的图像 1,1
    • Squeeze and pull the cap to remove it from the Nexus Q.

  2. Nexus Q Ball Bearing Ring Replacement: 步骤 2 中的图像 1,1
    • Use a spudger to disconnect the Taoglas Wi-Fi Dual Band Antenna.

  3. Nexus Q Ball Bearing Ring Replacement: 步骤 3 中的图像 1,1
    • Undo the ZIF connector by prying it with a spudger.

  4. Nexus Q Ball Bearing Ring Replacement: 步骤 4 中的图像 1,1
    • Use a Phillips #0 screwdriver to unscrew the four 1.3 mm screws.

    • After removing the screws, there will be two parts. The top part contains the daughterboard. Store it safely. It will not be used.

  5. Nexus Q Ball Bearing Ring Replacement: 步骤 5 中的图像 1,1
    • View the bottom half of the Nexus Q.

    • Use a Phillips #0 screwdriver to remove the four 0.8 mm screws holding the ball bearing ring in place.

  6. Nexus Q Ball Bearing Ring Replacement: 步骤 6 中的图像 1,1
    • Remove the ball bearing ring.

    • When placing a new ring in its place, make sure to orient it right or the top will not close.

结论

To reassemble your device, follow these instructions in reverse order.

Taewan Kim

于01/31/13注册

22 声望

创作了2篇指南

团队

Cal Poly, Team 7-10, Maness Winter 2013 Cal Poly, Team 7-10, Maness Winter 2013 的会员

CPSU-MANESS-W13S7G10

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 554