跳转到主内容

简介

installing the battery housing

  1. Using two fingers, push up on the rear cover. Using two fingers, push up on the rear cover.
    • Using two fingers, push up on the rear cover.

  2. The rear cover slides up and off.
    • The rear cover slides up and off.

  3. Using the plastic opening tools, pry the left bottom corner of the battery up.
    • Using the plastic opening tools, pry the left bottom corner of the battery up.

  4. Pull the battery up and out.
    • Pull the battery up and out.

  5. Remove the two Torx T5 screws.
    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

  6. Using the plastic opening tool, pry up the battery housing upwards. Push pry tool down, undoing the plastic tab.
    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

  7. Pry the upper left tab open on the battery housing. Pry the upper left tab open on the battery housing.
    • Pry the upper left tab open on the battery housing.

  8. Pry the top tab of the battery housing. Pry the top tab of the battery housing.
    • Pry the top tab of the battery housing.

  9. Pry the right side tab of the battery housing. Pry the right side tab of the battery housing.
    • Pry the right side tab of the battery housing.

  10. Pull up on the battery housing. Slide the battery housing out to remove it.
    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Niklas Johnson

于2012年01月31日注册

1,093 信誉积分

创作了18篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,474