跳转到主内容

Nexus 9 Antenna Board Replacement

你所需要的

  1. Nexus 9 Antenna Board Replacement, Rear Case: 步骤 1 中的图像 1,3 Nexus 9 Antenna Board Replacement, Rear Case: 步骤 1 中的图像 2,3 Nexus 9 Antenna Board Replacement, Rear Case: 步骤 1 中的图像 3,3
    • With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.

    • The rear-facing camera seems to fit a little too snugly in its compartment on the rear case; so make sure that it stays connected to the motherboard.

  2. Nexus 9 Antenna Board Replacement, Antenna Board: 步骤 2 中的图像 1,2 Nexus 9 Antenna Board Replacement, Antenna Board: 步骤 2 中的图像 2,2
    • This step is not necessary if you have already removed the battery.

    • Carefully peel up the copper shielding with your fingers.

    • Before fully removing the copper shielding, make sure that the blue antenna cable is out of the way of the copper tab.

  3. Nexus 9 Antenna Board Replacement: 步骤 3 中的图像 1,1
    • Unscrew the three 3 mm Torx T5 screws on the antenna board.

    • This step and the next show the battery removed, but it is not necessary to remove it if you are only replacing the antenna board.

  4. Nexus 9 Antenna Board Replacement: 步骤 4 中的图像 1,1
    • Use your fingers or a pair of tweezers to disconnect the blue antenna cable from the motherboard.

    • When reinstalling the antenna, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

    • The antenna board should now lift free of the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

于09/30/13注册

89,846 声望

创作了89篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 1,387