Nexus 5X 背板更换

当前版本的文档还未经巡查，您可以查看最新的已查核版本。

简介

再开始前，请确保手机关机，SIM卡已经取出。

你所需要的

步骤 1

这个步骤还没有翻译帮忙翻译一下

Insert a SIM card ejection tool into the hole on the SIM card tray, located on the left edge of the phone.
Press in to eject the SIM card tray.
Remove the SIM card tray.

翻译

步骤 2 背板

从SIM卡插槽开始，将塑料打开工具放在后面板和手机之间。
将开启器工具轻轻地滑动到手机周围，直到听到咔嗒声，并且明显地看到与手机主体与背板分开。
在手机的每个边缘继续进行此过程，直到指纹识别处。

翻译

A guitar pick is a good substitution for the plastic opening tool.

Sam Sippe - 2018年1月29日回复

Here’s a photo of the location of the 18 tabs that hold the back cover in place

Steve - 2018年5月12日回复

Twisting sideways didn’t do it for me, but sliding along the edge did. However, at first I didn’t realize that the pick was between the motherboard and midframe, rather than between midframe and back cover like it was supposed to. This led to breaking off a spring-loaded connector on the motherboard, connecting to an antenna (I guess) in the back cover. So far I haven’t noticed any reception issues, but I can’t say for sure.

In essence: be careful to get the pick towards the back cover, and not “straight in” under the midframe.

Hampus - 2020年8月26日回复

步骤 3

从手机背面的指纹识别处上轻轻取下后背板。

翻译

步骤 4

这个步骤还没有翻译帮忙翻译一下

Tilt the opening pick to lift the rear panel a little bit.
There are two more plastic clips next to the fingerprint sensor. Release them by gently pulling the rear panel.
Remove the rear panel.