Newport e500 Exhalation Module Disassembly - iFixit 维修指南

简介

If you need to access important parts associated with the Newort e500, removal of the exhalation module is an integral step. This step serves as a common pre-requisite to completing other guides. Make sure you are careful with the outlet boot as it is fragile. For more information refer to page 42 of the service manual.

步骤 1 Newport e500 Exhalation Module Disassembly

Newport e500 Exhalation Module Disassembly, Newport e500 Exhalation Module Disassembly: 步骤 1 中的图像 1，1

Pull up and remove the flexible rubber exhalation outlet boot (push fit).

步骤 2

Newport e500 Exhalation Module Disassembly: 步骤 2 中的图像 1，1

Disconnect the tubes from both sides of the flow sensor and the two tubes from the exhalation valve.

步骤 3

Newport e500 Exhalation Module Disassembly: 步骤 3 中的图像 1，1

Pull the exhalation module straight up to remove it from the GDU.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Jared McMullen

于05/02/18注册

473 声望

创作了4篇指南

+ 4更多徽章

团队

Cal Poly, Team S7-G16, Paton Spring 2020 Cal Poly, Team S7-G16, Paton Spring 2020 的会员

CPSU-PATON-S20S7G16

3 名成员

创作了13篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 3

总计 117