简介

By removing the case you will be able to install a capacitor or an antenna.

Rotate the device so that the bottom is facing up.
  • Rotate the device so that the bottom is facing up.

添加评论

Lift up all four rubber pads on the bottom of the router with the plastic opening tool.
  • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

  • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

添加评论

  • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

添加评论

  • Lift the bottom casing straight up from the router.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Ryan Murphy

于2011年10月03日注册

482 信誉积分

创作了4篇指南

团队

Cal Poly, Team 21-24, Maness Fall 2011 Cal Poly, Team 21-24, Maness Fall 2011 的会员

CPSU-MANESS-F11S21G24

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 5

总计 1,187