修复你的物品 社区 商店

Nest Cam Side Snap Locks Replacement

简介

The Nest Cam needs to be mounted on a stand for optimal posistioning. If your Nest Cam refuses to secure itself to the stand or falls off often, the side snap locks may have weakened or broken and need to be replaced.

你所需要的

  1. Nest Cam Side Snap Locks Replacement, Side Snap Locks: 步骤 1 中的图像 1，1

    • Remove the four 6 mm screws from the back panel with the J000 Phillips head screwdriver.

    • We suggest designated areas to keep track of all screws.

    编辑

  2. Nest Cam Side Snap Locks Replacement: 步骤 2 中的图像 1，3 Nest Cam Side Snap Locks Replacement: 步骤 2 中的图像 2，3 Nest Cam Side Snap Locks Replacement: 步骤 2 中的图像 3，3

    • Open the back panel completely to expose the inside of the Nest Cam.

    • Using the tweezers, disconnect the red and black mic cable from the motherboard.

    编辑

  4. Nest Cam Side Snap Locks Replacement: 步骤 3 中的图像 1，3 Nest Cam Side Snap Locks Replacement: 步骤 3 中的图像 2，3 Nest Cam Side Snap Locks Replacement: 步骤 3 中的图像 3，3

    • Disconnect the black Wi-Fi cable from the top of the motherboard with tweezers.

    • Use a plastic spudger to lift the motherboard and camera up enough to expose and disconnect the white cable with the tweezers.

    • Remove motherboard and camera completely from the housing.

    编辑

  5. Nest Cam Side Snap Locks Replacement: 步骤 4 中的图像 1，2 Nest Cam Side Snap Locks Replacement: 步骤 4 中的图像 2，2

    • Remove the four 3 mm Phillips #J000 screws from the side snap locks. Remove the old side snap locks and place the new side snap locks.

    • Make sure everything lines up for the screws.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Lisa Langley

于02/24/16注册

207 声望

撰写一个指南

徽章: 7

+ 4更多徽章

团队

USF Tampa, Team 1-1, Leahy Spring 2016 USF Tampa, Team 1-1, Leahy Spring 2016 的会员

USFT-LEAHY-S16S1G1

7 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 8

总计 1,980