跳转到主内容

Nerf Recon CS-6 Main Spring Replacement

你所需要的

  1. Nerf Recon CS-6 Main Spring Replacement, Remove Magazine: 步骤 1 中的图像 1,1
    • Skip this step if magazine is already removed.

    • Pull slide back.

    • Pull backwards on release buttons and slide magazine out.

    • Push slide back forward and pull trigger.

  2. Nerf Recon CS-6 Main Spring Replacement, Remove Visible Screws: 步骤 2 中的图像 1,1
    • Use the Phillips #0 Screwdriver to remove these 9 screws.

    • All screws marked in red are 9.6 mm Phillips #0 screws.

    • Note that left most screw is longer than the rest and is a 18.6 mm Phillips #0 screw.

  3. Nerf Recon CS-6 Main Spring Replacement, Remove Hidden Screws: 步骤 3 中的图像 1,2 Nerf Recon CS-6 Main Spring Replacement, Remove Hidden Screws: 步骤 3 中的图像 2,2
    • Pull slide back to reveal more screws.

    • Remove these 2 screws.

    • Push slide forward.

    • Pull trigger to release compression of the main spring.

    • Screws are 9.6 mm Phillips #0.

    • Pulling the trigger will keep spring from launching out of the gun when the two halves are separated.

  4. Nerf Recon CS-6 Main Spring Replacement, Remove Plunger Cap: 步骤 4 中的图像 1,1
    • Remove the screws on the plunger cap.

    • Tug the plunger cap off.

    • Screws are 9.6 mm Phillips #0.

  5. Nerf Recon CS-6 Main Spring Replacement, Remove Slide Screws: 步骤 5 中的图像 1,1
    • Remove the 2 screws on the slide.

    • Screws are 9.6 mm Phillips #0.

    • Hold the two halves of the gun together to prevent any springs from launching out.

  6. Nerf Recon CS-6 Main Spring Replacement, Split the Gun in Half: 步骤 6 中的图像 1,2 Nerf Recon CS-6 Main Spring Replacement, Split the Gun in Half: 步骤 6 中的图像 2,2
    • Pull the gun apart at the middle seam.

    • Watch for any springs that might launch out.

  7. Nerf Recon CS-6 Main Spring Replacement, Remove Spring: 步骤 7 中的图像 1,2 Nerf Recon CS-6 Main Spring Replacement, Remove Spring: 步骤 7 中的图像 2,2
    • Pull the spring out the back of the gun.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Asad Qureshi

于10/22/14注册

586 声望

创作了3篇指南

团队

Baylor, Team 8-14, Williams Fall 2014 Baylor, Team 8-14, Williams Fall 2014 的会员

BU-WILLIAMS-F14S8G14

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 3

过去 30 天: 39

总计 5,929