跳转到主内容

Nerf N-Strike Elite Strongarm Outer Shell Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. Nerf N-Strike Elite Strongarm Outer Shell Replacement, Outer Shell: 步骤 1 中的图像 1,2 Nerf N-Strike Elite Strongarm Outer Shell Replacement, Outer Shell: 步骤 1 中的图像 2,2
    • Lay the Nerf Strongarm on its side, left side facing up.

  2. Nerf N-Strike Elite Strongarm Outer Shell Replacement: 步骤 2 中的图像 1,2 Nerf N-Strike Elite Strongarm Outer Shell Replacement: 步骤 2 中的图像 2,2
    • Locate the 12 Philips head screws and remove them: Head Diameter= 4.3mm, Thread Pitch= 1mm, Screw Length= 8mm

  3. Nerf N-Strike Elite Strongarm Outer Shell Replacement: 步骤 3 中的图像 1,1
    • Before removing the cover, make sure to first remove the cover for the cocking mechanism. The top half is freely removable.

    • The other half of the cocking mechanism is connected with a spring which may slide off the blaster. Be advised this is normal but worth watching to avoid damaging the spring.

  4. Nerf N-Strike Elite Strongarm Outer Shell Replacement: 步骤 4 中的图像 1,1
    • At this time, remove the blaster cover to reveal its internals.

    • If the blaster is resting on its side, the barrel may shift slightly as it is leaning on itself (seen in the image). This is normal but should be handled with care to keep the blaster together.

  5. Nerf N-Strike Elite Strongarm Outer Shell Replacement: 步骤 5 中的图像 1,1
    • Once the screws have been removed, lift the top half of the gun off.

    • Notice, the gray colored piece must be removed first in order for the larger half to be removed.

    • Take care and try not to lose any smaller pieces as you open it up.

    • Locking tab for attachments.

结论

To reassemble your device, follow these instructions in reverse order.

团队

USF Tampa, Team 5-4, Blackwell Fall 2015 USF Tampa, Team 5-4, Blackwell Fall 2015 的会员

USFT-BLACKWELL-F15S5G4

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 182