跳转到主内容

Nerf N-Strike Elite Strongarm Main Spring Replacement

你所需要的

  1. Nerf N-Strike Elite Strongarm Main Spring Replacement, Main Spring: 步骤 1 中的图像 1,1
    • Remove the outside cover of the Nerf gun (cover and charging slide, 12 Phillips #0 screws).

  2. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 2 中的图像 1,1
    • From the base, lift the action and the trigger.

  3. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 3 中的图像 1,1
    • Lift the Nerf dart cylinder and the firing mechanism (spring chamber).

  4. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 4 中的图像 1,3 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 4 中的图像 2,3 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 4 中的图像 3,3
    • Unscrew screws (2) from the cylinder rotator mechanism.

  5. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 5 中的图像 1,1
    • Remove the air plunger and the spring from inside the chamber.

  6. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 6 中的图像 1,3 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 6 中的图像 2,3 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 6 中的图像 3,3
    • Turn the spring counter-clockwise to free the spring. Be careful at the beginning and the end of the process.

  7. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 7 中的图像 1,3 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 7 中的图像 2,3 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 7 中的图像 3,3
    • Replace the spring.

    • The spring will be greasy. Don’t be alarmed. Be careful at the beginning and the end of the process because it is like getting a key ring on at the notches, particularly at the top of the chamber.

    • Tip: If dry, use a little vegetable oil on the O-ring before putting it back.

  8. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 8 中的图像 1,1
    • Return the plunger to the spring chamber.

  9. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 9 中的图像 1,2 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 9 中的图像 2,2
    • Screw the cover back onto the cylinder rotator.

  10. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 10 中的图像 1,1
    • Place the spring chamber and the Nerf bullet cylinder back into the base.

  11. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 11 中的图像 1,2 Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 11 中的图像 2,2
    • Screw the trigger and the action back in. Swing the gray gun charging slide out when putting the action back in.

  12. Nerf N-Strike Elite Strongarm Main Spring Replacement: 步骤 12 中的图像 1,1
    • Secure the cover and the charging slide with the 12 screws.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Robert

于03/18/15注册

192 声望

撰写一个指南

4条评论

Where can I buy a replacement spring?

mike580358 - 回复

you can get a replacement or an upgrade spring at the website www.nfstrike.com

NEW CHANNEL -

When I put it back together it did not work

autisteck - 回复

My kid got sand in this blaster and i was tasked with fixing. i degreased the parts and used a plastic grease to re lube, but it was too thick for the plunger so the darts limped out the barrel. so i opened it up and used some fogging oil in there after cleaning it out. works a treat. The biggest problem was the little spring on the barrel.. I lost it 4 times, and the fifth it was gone. So i used a spring from a clicky pen and it works great now!

tiderfish - 回复

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 8

过去 30 天: 61

总计 16,196