跳转到主内容

简介

A damaged or obstructed barrel can greatly hinder your blaster’s performance. Follow the procedure to clean or replace the barrel.

Modifying your blaster is not advised and may void the manufacturer’s warranty in certain states.

This blaster is equipped with a rifled barrel for maximum performance.

配件

没有特定配件。

  1. While holding the blaster, rotate the barrel assembly in the counter-clockwise direction and pull away from the blaster.
    • While holding the blaster, rotate the barrel assembly in the counter-clockwise direction and pull away from the blaster.

  2. Slide the hand grip assembly toward the end of the barrel and off the barrel assembly.
    • Slide the hand grip assembly toward the end of the barrel and off the barrel assembly.

    • This may require more force than anticipated.

  3. Disassemble the orange barrel cap by removing two 8mm Phillips screws.
    • Disassemble the orange barrel cap by removing two 8mm Phillips screws.

  4. Disassemble the barrel assembly by removing four 8mm Phillips screws from the blue barrel housing.
    • Disassemble the barrel assembly by removing four 8mm Phillips screws from the blue barrel housing.

    • There are springs that may become displaced when the barrel housing is removed. Proceed with caution.

  5. Remove the orange barrel from the assembly.
    • Remove the orange barrel from the assembly.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

ericharman

于2016年03月02日注册

1,380 信誉积分

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 21

过去的30天: 85

总计 9,347