简介

Keep your Nerf N-Strike Elite Hail-Fire running with new batteries.

配件

无需配件。

  1. Remove the two 9.0 mm Phillips screws from the battery compartment.
    • Remove the two 9.0 mm Phillips screws from the battery compartment.

  2. Pull the battery compartment out and away from the gun.
    • Pull the battery compartment out and away from the gun.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Apply downwards pressure on the battery you're trying to remove in the direction of the spring.
    • Apply downwards pressure on the battery you're trying to remove in the direction of the spring.

  5. Pull battery straight out. Do not throw used batteries in the trash! Please electronically recycle them properly.
    • Pull battery straight out. Do not throw used batteries in the trash! Please electronically recycle them properly.

  6. When installing new batteries, ensure that their polarities are facing the correct directions. Follow the inscriptions on the bottom of the battery tray, or place the flat side of each battery against the spring.
    • When installing new batteries, ensure that their polarities are facing the correct directions. Follow the inscriptions on the bottom of the battery tray, or place the flat side of each battery against the spring.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Jonathan Peck

于2014年01月24日注册

166 信誉积分

撰写一个指南

团队

Cal Poly, Team 13-13, Regan Winter 2014 Cal Poly, Team 13-13, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G13

4 名成员

创作了7篇指南

浏览统计数据:

过去的24小时: 8

过去的7天: 35

过去的30天: 206

总计 17,206