修复你的物品 社区 商店

Neato Botvac 65 Wheel Motors Replacement

简介

Step by Step instructions to replace Neato Botvac 65 wheel motors.

你所需要的

  1. Neato Botvac 65 Wheel Motors Replacement, Battery: 步骤 1 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement, Battery: 步骤 1 中的图像 2，2

    • Flip the device upside down.

    • Locate the two (2) 20mm screws on the batttery plate.

    编辑

  2. Neato Botvac 65 Wheel Motors Replacement: 步骤 2 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 2 中的图像 2，2

    • Use the Phillips #1 screwdriver to loosen both screws.

    编辑

  3. Neato Botvac 65 Wheel Motors Replacement: 步骤 3 中的图像 1，1

    • Remove the battery back plate to reveal the battery.

    编辑

  4. Neato Botvac 65 Wheel Motors Replacement: 步骤 4 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 4 中的图像 2，2

    • Disconnect the current battery by pulling the connector from the base and pushing on the clip.

    编辑

  5. Neato Botvac 65 Wheel Motors Replacement, Brush: 步骤 5 中的图像 1，1

    • Flip the device upside down.

    编辑

  6. Neato Botvac 65 Wheel Motors Replacement: 步骤 6 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 6 中的图像 2，2

    • Use the screwdriver to take off the four (4) 10mm screws located near the brush which secure the plastic guard.

    编辑

  8. Neato Botvac 65 Wheel Motors Replacement: 步骤 7 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 7 中的图像 2，2

    • Remove the plastic brush guard.

    • Pull off the plastic covering the brush.

    编辑

  9. Neato Botvac 65 Wheel Motors Replacement: 步骤 8 中的图像 1，1

    • Lift the brush to clean or replace.

    编辑

  10. Neato Botvac 65 Wheel Motors Replacement, Top Cover: 步骤 9 中的图像 1，1

    • Flip device upside down.

    • Locate the six (6) screw connected to the top cover.

    编辑

  11. Neato Botvac 65 Wheel Motors Replacement: 步骤 10 中的图像 1，1

    • Remove eight (8) star screws using the T10 bit.

    编辑

  12. Neato Botvac 65 Wheel Motors Replacement: 步骤 11 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 11 中的图像 2，2

    • Pull off one side of the brush front cover, and then pull off the other.

    编辑

  13. Neato Botvac 65 Wheel Motors Replacement: 步骤 12 中的图像 1，1

    • Flip right side up and turn around.

    • FInd the two clips connecting the top cover to the body of the device.

    编辑

  14. Neato Botvac 65 Wheel Motors Replacement: 步骤 13 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 13 中的图像 2，2

    • Lift up on the top cover gently.

    • Disconnect the connector from the motherboard to detach the top cover from the robot.

    编辑

  15. Neato Botvac 65 Wheel Motors Replacement, Wheel Motors: 步骤 14 中的图像 1，3 Neato Botvac 65 Wheel Motors Replacement, Wheel Motors: 步骤 14 中的图像 2，3 Neato Botvac 65 Wheel Motors Replacement, Wheel Motors: 步骤 14 中的图像 3，3

    • Remove four (4) 10mm 'star' screws using the T10 bit from the base plate where the rotating infrared sensor is located.

    • Carefully place the sensor on or near the robot without pulling the wires out.

    编辑

  16. Neato Botvac 65 Wheel Motors Replacement: 步骤 15 中的图像 1，1

    • Remove two (2) screws using the T10 bit that connects the plastic protector over the wheel motor.

    • Pull up on the metal weight to remove.

    编辑

  17. Neato Botvac 65 Wheel Motors Replacement: 步骤 16 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 16 中的图像 2，2

    • Flip the botvac over being careful not to drop the IR sensor or cause damage to the wires.

    • Using a flat-head screw driver and a cloth for protection, press on the clips until they recede into the botvac.

    编辑

  18. Neato Botvac 65 Wheel Motors Replacement: 步骤 17 中的图像 1，2 Neato Botvac 65 Wheel Motors Replacement: 步骤 17 中的图像 2，2

    • Flip the robot back over(right-side up).

    • Carefully remove the plastic cover that protects the motor.

    编辑

  19. Neato Botvac 65 Wheel Motors Replacement: 步骤 18 中的图像 1，3 Neato Botvac 65 Wheel Motors Replacement: 步骤 18 中的图像 2，3 Neato Botvac 65 Wheel Motors Replacement: 步骤 18 中的图像 3，3

    • Carefully remove the motor that you wish to replace.

    • Trace the wires that are connected to the motor back to the motherboard.

    • Disconnect the connector from the motherboard for the respective motor you're replacing.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Joseph Caton

于02/15/17注册

334 声望

创作了3篇指南

徽章: 10

+ 7更多徽章

团队

USF Tampa, Team S2-G1, Lacy Spring 2017 USF Tampa, Team S2-G1, Lacy Spring 2017 的会员

USFT-LACY-S17S2G1

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 4

过去 30 天： 12

总计 1,463