修复你的物品 社区 商店

Nabi Jr Camera Replacement

你所需要的

  1. Nabi Jr Camera Replacement, Rear Case: 步骤 1 中的图像 1，1

    • Remove the red rubber case from the device. This should come off with ease.

    编辑

  2. Nabi Jr Camera Replacement: 步骤 2 中的图像 1，1

    • Turn the device so the screen is facing away from you.

    • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

    编辑

  4. Nabi Jr Camera Replacement: 步骤 3 中的图像 1，1

    • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

    编辑

  5. Nabi Jr Camera Replacement: 步骤 4 中的图像 1，1

    • After loosening the back cover, remove it from the device so you can get at the innards.

    编辑

  6. Nabi Jr Camera Replacement, Camera: 步骤 5 中的图像 1，1

    • Using tweezers remove tape that connects the board to the camera's ribbon cable.

    • The ribbon cable is inserted into a slot on the board.

    • Lift the slot's locking tab up to easily remove the ribbon cable from the board.

    • May require force

    编辑

  7. Nabi Jr Camera Replacement: 步骤 6 中的图像 1，1

    • Place the new camera piece in place of the old and plug its ribbon cable back into the respective slot on the board.

    • Make sure the locking tab on the slot is in its up position before inserting tape.

    • Once the tape is inserted press the locking tab back to its down position to securely fasten the ribbon cable.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Kaila Joy

于03/24/15注册

86 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 的会员

UMASSD-VIJAYBHASKAR-S15S4G3

3 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 284