本指南有最近更改,您可查看未经巡查的最新版本。
简介
This guide should be used when replacing the motherboard or other components. Has the NABI XD taken water damaged or won't turn on after troubleshooting the charger. Then, replacing the motherboard will fix you device.
你所需要的
-
-
Use the plastic opening tool at the top left corner seam, then pry the corner apart.
-
-
-
Place your fingernails on both sides of the connector and pull it straight back away from the holder.
-
-
-
-
To remove the marked ribbons, use your fingernails or a spudger to lift up small tab
-
Use the Precision Tweezers to gently pull the ribbons straight out of the connectors.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.