简介

Batteries power the laser. If the laser is not working, one of the reasons might be the batteries. Follow the steps in this guide to correctly replace the batteries.

配件

无需配件。

  1. The batteries are located in the handle of the blaster.
    • The batteries are located in the handle of the blaster.

    • The base plate is held in place with a single phillips head, 8.2 mm screw. Remove this screw and remove the base plate to access the battery compartment.

    添加评论

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Once the batteries have been removed, you can check to see if they have any charge left in them with a battery tester.
    • Once the batteries have been removed, you can check to see if they have any charge left in them with a battery tester.

    • If they are in fact dead, replace them with standard AA type batteries in the correct orientation.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Nicholas Samokyszyn

于2014年02月24日注册

338 信誉积分

创作了3篇指南

团队

Michigan Tech, Team 5-8, Lauer Spring 2014 Michigan Tech, Team 5-8, Lauer Spring 2014 的会员

MTU-LAUER-S14S5G8

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 18

总计 1,617