Mr. Coffee BVMC-SJX33GT O-Rings Replacement

简介

There are two O-rings in the Mr. Coffee BVMC-SJX33GT; If your coffee maker is leaking, the O-rings may potentially be damaged in some way and in need of replacement.

Make sure your coffee maker is unplugged and empty of all water before attempting to make any repairs.

你所需要的

步骤 1 Base

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Base: 步骤 1 中的图像 1，1

Turn your coffee maker over so that the base is facing up.

翻译

步骤 2

Locate the seven 13.5mm screws securing the base to the coffee maker.
Unscrew the screws using a #2 Phillips head screwdriver.
Use a screwdriver with a magnetic tip to more easily remove the three screws in the back and two in the middle.

翻译

步骤 3 security screws

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, security screws: 步骤 3 中的图像 1，1

Also the front two screws are safety screws: they have a 6 sided star shape with a raised dimple in the center to prevent homebodies from casually opening the machine. (probably from the Sunbeam’s (owns Mr. Coffee) legal dept.) Anyway you will need a security bit to remove the screws and not a phillips screw driver.

翻译

步骤 4

Lift base to remove.
If the base sticks along one edge, do not pull at an angle. Gently tug straight up while sliding a finger along the edge in order to pop the clips.

翻译

步骤 5 Rubber Hose

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Rubber Hose: 步骤 5 中的图像 1，3

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Rubber Hose: 步骤 5 中的图像 2，3

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Rubber Hose: 步骤 5 中的图像 3，3

Locate the metal clamps.
Using a pair of pliers or your fingers, slide clamps away from tube opening.
All following steps regarding the rubber hoses should be completed for both hoses.

翻译

步骤 6

Mr. Coffee BVMC-SJX33GT O-Rings Replacement: 步骤 6 中的图像 3，3

Using a plastic opening tool, loosen rubber hose from metal tubing.
Once loosened, grip the hose and pull it from the metal tubing.

翻译

步骤 7

Slide metal clamps off hoses.

翻译

步骤 8

Locate the other set of metal clamps.
Using needle nose pliers or your fingers remove these clamps by pinching the clamps and sliding them up the tubes.

翻译

步骤 9

Grip the hoses and pull them straight up and out.

翻译

步骤 10 Heating Plate

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Heating Plate: 步骤 10 中的图像 1，3

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Heating Plate: 步骤 10 中的图像 2，3

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, Heating Plate: 步骤 10 中的图像 3，3

Locate the two 17mm screws securing the bracing bar.
Unscrew the screws with a #2 Phillip's head screwdriver and remove the bracing bar

翻译

步骤 11

Using a finger to keep the heating plate in place, grip the metal tubing and gently pull it away from the plate.
Set the metal tubing aside.

翻译

步骤 12

Push the heating plate up from below and remove.

翻译

步骤 13 O-Rings

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, O-Rings: 步骤 13 中的图像 1，2

Mr. Coffee BVMC-SJX33GT O-Rings Replacement, O-Rings: 步骤 13 中的图像 2，2

Locate the five 11.5mm screws securing the plastic ring to the coffee maker.
Unscrew the screws using a #2 Phillip's head screwdriver.

翻译

步骤 14

Mr. Coffee BVMC-SJX33GT O-Rings Replacement: 步骤 14 中的图像 3，3

Using a plastic opening tool, pry the first o-ring out of the plastic ring.
If you happen to mix up the o-rings, note that this o-ring is thicker than the second.

翻译

步骤 15

Gripping the plastic ring, pull it free from the coffee maker.
Flip the plastic ring over.

翻译

步骤 16

Using your fingers, pry the other o-ring free from the plastic ring.
If you happen to mix up the o-rings, note that this o-ring is thinner than the first.

翻译