简介

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

  1. See the speaker replacement guide and follow steps 1 and 2.
    • See the speaker replacement guide and follow steps 1 and 2.

    添加评论

  2. Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.
    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Carefully lift the speaker out of its housing while leaving all wires connected.

    添加评论

    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: 如何焊接和脱焊

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Ben

于2014年02月24日注册

104 信誉积分

撰写一个指南

团队

Michigan Tech, Team 5-1, Lauer Spring 2014 Michigan Tech, Team 5-1, Lauer Spring 2014 的会员

MTU-LAUER-S14S5G1

2 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 136