简介

Replace the speaker in the phone.

  1. Open the flip cover of the phone with the LCD screen facing towards you.
    • Open the flip cover of the phone with the LCD screen facing towards you.

  2. Use a Razor Blade to remove the screw covers. Razor Blade is very sharp. Use caution.
    • Use a Razor Blade to remove the screw covers.

    • Razor Blade is very sharp. Use caution.

  3. Unscrew the screws using a Phillips #00 Screwdriver.
    • Unscrew the screws using a Phillips #00 Screwdriver.

  4. Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.
    • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

  5. Gently separate the flip cover case from the phone with your hands when the crack is wide enough.
    • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

  6. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  7. Partially close the flip cover of the phone in order to take off the outer case.
    • Partially close the flip cover of the phone in order to take off the outer case.

  8. Completely remove the outer casing from the phone.
    • Completely remove the outer casing from the phone.

  9. Place your thumb underneath the protective metal covering to remove it from the phone. Place your thumb underneath the protective metal covering to remove it from the phone.
    • Place your thumb underneath the protective metal covering to remove it from the phone.

  10. Gently detach the black microchip from the phone with a Tweezer.
    • Gently detach the black microchip from the phone with a Tweezer.

  11. Prop out the LCD board from the phone using your fingertips.
    • Prop out the LCD board from the phone using your fingertips.

  12. Remove the LCD board from the phone by grabbing the bottom side of the LCD board. Remove the LCD board from the phone by grabbing the bottom side of the LCD board.
    • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

  13. Use a flathead screwdriver to gently remove the speaker.
    • Use a flathead screwdriver to gently remove the speaker.

  14. Insert the new speaker into the phone and it should look like the image at left.
    • Insert the new speaker into the phone and it should look like the image at left.

结论

To reassemble your device, follow these instructions in reverse order.

Kevin Dermody

于2010年04月08日注册

1 信誉积分

撰写一个指南

团队

Cal Poly, Team 34-56, Forte Spring 2010 Cal Poly, Team 34-56, Forte Spring 2010 的会员

CPSU-FORTE-S10S34G56

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 2

总计 1,089