简介

The antenna greatly affects the quality of the phone's reception.

Place the phone on a flat surface with the front facing down and the antenna fully extended. Use a spudger to remove the circular rubber cover from the base of the antenna. Remove the 3.2 mm Torx T5 screw located under the rubber cover.
  • Place the phone on a flat surface with the front facing down and the antenna fully extended.

  • Use a spudger to remove the circular rubber cover from the base of the antenna.

  • Remove the 3.2 mm Torx T5 screw located under the rubber cover.

添加评论

Remove the antenna by grasping from the white plastic piece just below the antenna and pulling away from the phone. Do not grasp the black antenna piece to pull it out. Doing so may damage it. Do not grasp the black antenna piece to pull it out. Doing so may damage it.
  • Remove the antenna by grasping from the white plastic piece just below the antenna and pulling away from the phone.

  • Do not grasp the black antenna piece to pull it out. Doing so may damage it.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Garrison Stevens

于2012年10月22日注册

1 信誉积分

创作了11篇指南

团队

Clemson, Team 15-2, Benson Fall 2012 Clemson, Team 15-2, Benson Fall 2012 的会员

CLEM-BENSON-F12S15G2

4 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 315