1. Open the phone so that the keypad and screen are facing up.
    • Open the phone so that the keypad and screen are facing up.

  2. Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.
    • Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Use the Torx T5 screw driver head to remove the four 5.4 mm screws from the upper inner face.
    • Use the Torx T5 screw driver head to remove the four 5.4 mm screws from the upper inner face.

  5. Once the screws and upper casing have been removed, locate where the camera attaches to the upper circuit board and detach it using a pair of tweezers.
    • Once the screws and upper casing have been removed, locate where the camera attaches to the upper circuit board and detach it using a pair of tweezers.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Will Edwards

于2012年10月22日注册

61 信誉积分

创作了9篇指南

团队

Clemson, Team 14-1, Benson Fall 2012 Clemson, Team 14-1, Benson Fall 2012 的会员

CLEM-BENSON-F12S14G1

4 名成员

创作了23篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 326