简介

This repair guide shows how to replace a bad speaker.

Press down on the back button while pulling away from the body of the phone to release the back cover. Press down on the back button while pulling away from the body of the phone to release the back cover. Press down on the back button while pulling away from the body of the phone to release the back cover.
  • Press down on the back button while pulling away from the body of the phone to release the back cover.

添加评论

Remove the battery from the phone by gently pulling upward on the battery with your fingers. Remove the battery from the phone by gently pulling upward on the battery with your fingers. Remove the battery from the phone by gently pulling upward on the battery with your fingers.
  • Remove the battery from the phone by gently pulling upward on the battery with your fingers.

添加评论

Unscrew and remove the antenna by gripping the base and twisting clockwise. Once the antenna has passed the threading, pull out.
  • Unscrew and remove the antenna by gripping the base and twisting clockwise.

  • Once the antenna has passed the threading, pull out.

添加评论

Remove the screws from the upper side of the phone  with the T6 Torx screwdriver. The first screw is underneath where the antenna was and the other is visible to the right.
  • Remove the screws from the upper side of the phone with the T6 Torx screwdriver.

  • The first screw is underneath where the antenna was and the other is visible to the right.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Insert the spudger under the left corner of the bottom plate. Using a twist and pry motion seperate the bottom plate and work your way to the right. This can be somewhat difficult and require a good deal of work.
  • Insert the spudger under the left corner of the bottom plate.

  • Using a twist and pry motion seperate the bottom plate and work your way to the right.

  • This can be somewhat difficult and require a good deal of work.

添加评论

Use the T6 Torx screwdriver to remove the bottom two screws. Use the T6 Torx screwdriver to remove the bottom two screws.
  • Use the T6 Torx screwdriver to remove the bottom two screws.

添加评论

Insert the spudger between the key plate and the back of the phone and work your way around the edge of the phone to pop keys off. There is one clasp on either side that needs to be removed before the keys come off.
  • Insert the spudger between the key plate and the back of the phone and work your way around the edge of the phone to pop keys off.

  • There is one clasp on either side that needs to be removed before the keys come off.

  • This step is extremely hard and may require time, strength, endurance, and multiple spudgers.

添加评论

Pull the pressure plate forward to expose the logic board. Use the spludger to pry off the plug that connects pressure pad to the logic board. Remove the pressure pad.
  • Pull the pressure plate forward to expose the logic board.

  • Use the spludger to pry off the plug that connects pressure pad to the logic board.

  • Remove the pressure pad.

添加评论

Use the spudger to pry off the plug that connects logic board to the screen.
  • Use the spudger to pry off the plug that connects logic board to the screen.

添加评论

Remove the logic board. Remove the logic board.
  • Remove the logic board.

添加评论

Use the spudger take the speaker out. Use the spudger take the speaker out.
  • Use the spudger take the speaker out.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Karl Sanders

于2010年01月26日注册

8 信誉积分

创作了14篇指南

团队

Cal Poly, Team 8-49, Regan Winter 2010 Cal Poly, Team 8-49, Regan Winter 2010 的会员

CPSU-REGAN-W10S8G49

5 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 966