简介

How to replace a faulty antenna.

  1. Depress the silver button.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

    A spudger may be helpful

    Nick - 回复

  2. Hold battery from both sides at the bottom.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

    添加评论

    • Remove the four screws from the corners using a T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

    添加评论

    • Use spudger to pry up back cover from the two side clips.

    • NOTE: sticker might be attached to rest of phone.

    添加评论

    • Flip over the back cover.

    • Remove the plastic frame.

    添加评论

    • Lift up antenna.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

于2010年04月10日注册

1 信誉积分

创作了5篇指南

团队

Cal Poly, Team 25-86, Amido Spring 2010 Cal Poly, Team 25-86, Amido Spring 2010 的会员

CPSU-AMIDO-S10S25G86

5 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,690