跳转到主内容

简介

This guide is used for taking apart and/or replacing the circuit board of the phone.

  1. Push down on the chrome button at the bottom of the back of the phone. Slide the outer casing down to reveal the battery Push down on the chrome button at the bottom of the back of the phone. Slide the outer casing down to reveal the battery
    • Push down on the chrome button at the bottom of the back of the phone. Slide the outer casing down to reveal the battery

  2. Apply pressure to the bottom corners of the battery, and then push upwards to lever the battery out.
    • Apply pressure to the bottom corners of the battery, and then push upwards to lever the battery out.

  3. Remove the rubber screw covers using a plastic spudger. Use a T-6 screw bit to remove the screws. Use a T-6 screw bit to remove the screws.
    • Remove the rubber screw covers using a plastic spudger.

    • Use a T-6 screw bit to remove the screws.

  4. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  5. Unscrew the antenna.
    • Unscrew the antenna.

  6. Use a plastic opening tool to undo the latches at the indicated spots. Dental tools may be used in place of a plastic opening tool, as they are difficult to use. Warning: exercise caution as the plastic can break.
    • Use a plastic opening tool to undo the latches at the indicated spots.

    • Dental tools may be used in place of a plastic opening tool, as they are difficult to use.

    • Warning: exercise caution as the plastic can break.

  7. Remove the circuit board connection (copper flap) by first loosening it with a plastic opening tool. Lift the connection up with your finger.
    • Remove the circuit board connection (copper flap) by first loosening it with a plastic opening tool.

    • Lift the connection up with your finger.

  8. Use your finger to remove the pressure pad from the buttons on the side of the casing. Remove the plastic flap from around the buttons by lifting it up and pulling it out. Gently lift the logic board up.
    • Use your finger to remove the pressure pad from the buttons on the side of the casing.

    • Remove the plastic flap from around the buttons by lifting it up and pulling it out.

    • Gently lift the logic board up.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

gregatron

于2009年10月29日注册

105 信誉积分

创作了6篇指南

团队

Cal Poly, Team 6-6, Maness Fall 2009 Cal Poly, Team 6-6, Maness Fall 2009 的会员

CPSU-MANESS-F09S6G6

4 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 2,985