简介

This guide will help you replace the upper casing on your device. Following these steps will also enable you to replace the camera.

配件

无需配件。

Remove the four rubber pieces from all corners of the area that borders the screen.
  • Remove the four rubber pieces from all corners of the area that borders the screen.

添加评论

Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
  • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

  • Be sure that you do not strip or damage the screws.

添加评论

Carefully pry the screen away from the phone using a plastic spudger.
  • Carefully pry the screen away from the phone using a plastic spudger.

  • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

添加评论

Take the screen housing off of the casing. Watch for small pieces falling out of the screen during this step. Keep track of these pieces. Watch for small pieces falling out of the screen during this step. Keep track of these pieces.
  • Take the screen housing off of the casing.

  • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

krisko

于2010年01月14日注册

95 信誉积分

创作了4篇指南

团队

Cal Poly, Team 11-4, Forte Winter 2010 Cal Poly, Team 11-4, Forte Winter 2010 的会员

CPSU-FORTE-W10S11G4

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 4

总计 4,898