简介

This guide will show you how to remove and replace the speaker for a Motorola V3c.

Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c. Lift and remove the rear panel away from the V3c. Lift and remove the rear panel away from the V3c.
  • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

  • Lift and remove the rear panel away from the V3c.

With the phone closed, press the silver button shown with a fingernail or such. Tilt and lift the battery cover and put aside.

walltoall - 回复

Remove the battery by pushing in the top of the battery and lifting it away from the phone. Remove the battery by pushing in the top of the battery and lifting it away from the phone.
  • Remove the battery by pushing in the top of the battery and lifting it away from the phone.

The Motorola V3 battery has a notch in one corner to ensure it can only go in one way. Fit the replacement battery by offering its bottom edge to the device, then tilt and click using thumb pressure.

walltoall - 回复

Unscrew the two screws in the back using the T6.
  • Unscrew the two screws in the back using the T6.

添加评论

Use the spudger to pop the bottom  and the sides of the back casing
  • Use the spudger to pop the bottom and the sides of the back casing

  • Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon

添加评论

Peel off the connector between the motherboard and the body of the phone
  • Peel off the connector between the motherboard and the body of the phone

添加评论

Pull out the two black rubber covers using tweezers The second rubber cover is much harder to get out
  • Pull out the two black rubber covers using tweezers

  • The second rubber cover is much harder to get out

添加评论

Pull out the white plastic cover by unclipping the two plastic pieces shown Pull out the white plastic cover by unclipping the two plastic pieces shown
  • Pull out the white plastic cover by unclipping the two plastic pieces shown

添加评论

Pull out the speaker
  • Pull out the speaker

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Joshua Ruehlig

于2010年01月14日注册

503 信誉积分

创作了4篇指南

团队

Cal Poly, Team 11-4, Forte Winter 2010 Cal Poly, Team 11-4, Forte Winter 2010 的会员

CPSU-FORTE-W10S11G4

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 5,256