修复你的物品

维修的权力

商店

Motorola Razr V3c Screen (CDMA) Replacement

撰写者： Joshua Ruehlig (和另外6个贡献者)
  • 评论： 1
  • 收藏 6
  • 完成 1

难度

中等

步骤

10

所需时间

建议一个时间??

节

3

标志

0

简介

This guide will show you how to remove and replace the screen for a Motorola V3c.

工具

购买这些工具

配件

没有特定配件。

  1. Remove the four rubber pieces from all corners of the area around the screen.

    • Remove the four rubber pieces from all corners of the area around the screen.

    编辑

  2. Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Be sure that you do not strip or damage the screws.

    编辑

  3. Carefully pry the screen away from the phone using a plastic spudger.

    • Carefully pry the screen away from the phone using a plastic spudger.

    • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

    编辑

  4. Take the screen housing off of the casing. Watch for small pieces falling out of the screen during this step. Keep track of these pieces. Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

    • Take the screen housing off of the casing.

    • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

    编辑

  6. Pry screen cover off with plastic opening tool. The screen cover has some adhesive holding it to the screen.

    • Pry screen cover off with plastic opening tool.

    • The screen cover has some adhesive holding it to the screen.

    编辑

  7. Remove small black sticker covering the camera ribbon connector.

    • Remove small black sticker covering the camera ribbon connector.

    编辑

  8. Flip over small hinge that covers the camera ribbon connection.

    • Flip over small hinge that covers the camera ribbon connection.

    编辑

  9. Pull off the rubber camera cover and camera. The camera and camera cover may come off either separately or together. The camera and camera cover may come off either separately or together.

    • Pull off the rubber camera cover and camera.

    • The camera and camera cover may come off either separately or together.

    编辑

  10. Disconnect the metallic ribbon cover.

    • Disconnect the metallic ribbon cover.

    编辑

  11. Remove and replace the screen. Remove and replace the screen.

    • Remove and replace the screen.

    编辑
终点

另外一个人完成了本指南。

作者

与6其他贡献者

Joshua Ruehlig

于2010年01月14日注册

503 信誉积分

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 11-4, Forte Winter 2010 Cal Poly, Team 11-4, Forte Winter 2010 的会员

CPSU-FORTE-W10S11G4

3 名成员

创作了8篇指南

一条评论

添加一条评论

Is it a T5 or a T4 for removing the screws?

Francis Reyes - 回复

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 4

总计 9,167