简介

This guide will show you how to remove and replace the screen for a Motorola V3c.

配件

无需配件。

  1. Remove the four rubber pieces from all corners of the area that borders the screen.
    • Remove the four rubber pieces from all corners of the area that borders the screen.

    添加评论

  2. Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
    • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Be sure that you do not strip or damage the screws.

    添加评论

    • Carefully pry the screen away from the phone using a plastic spudger.

    • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

    添加评论

    • Take the screen housing off of the casing.

    • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

    添加评论

    • Pry screen cover off with plastic spudger.

    • The screen cover has some adhesive holding it to the screen

    添加评论

    • Remove small black sticker covering the camera ribbon connector.

    添加评论

    • Flip over small hinge that covers the camera ribbon connection.

    添加评论

    • Pull off the rubber camera cover and camera.

    • The camera and camera cover may come off either separately or together.

    添加评论

    • Disconnect the metallic ribbon cover.

    添加评论

    • Remove and replace the screen.

    添加评论

终点

另外一个人完成了本指南。

Joshua Ruehlig

于2010年01月14日注册

503 信誉积分

创作了4篇指南

团队

Cal Poly, Team 11-4, Forte Winter 2010 Cal Poly, Team 11-4, Forte Winter 2010 的会员

CPSU-FORTE-W10S11G4

3 名成员

创作了8篇指南

Is it a T5 or a T4 for removing the screws?

Francis Reyes - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 13

总计 8,967