跳转到主内容

简介

This guide will show you how to install the upper casing of the phone. This guide is necessary in order to remove the LCD screen or the call speaker.

  1. Remove the back cover by pressing down the silver button. Pull the cover away from the phone.
    • Remove the back cover by pressing down the silver button.

    • Pull the cover away from the phone.

  2. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.
    • Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.

  3. Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.
    • Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.

    • Our phone is missing the two left screw covers, be careful not to lose yours too!

  4. Remove the four T5 Torx screws that were underneath the rubber covers.
    • Remove the four T5 Torx screws that were underneath the rubber covers.

  5. Use the plastic opening tool to pry the top cover away from the phone.
    • Use the plastic opening tool to pry the top cover away from the phone.

    • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Ian Cottengim

于2013年04月18日注册

112 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-46, Amido Spring 2013 Cal Poly, Team 3-46, Amido Spring 2013 的会员

CPSU-AMIDO-S13S3G46

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 12

总计 2,276