简介

This guide will show you how to install the Motorola Razr V3 camera. You may need to install a new camera if the camera doesn't show any picture or otherwise does not work.

视频概述

  1. Remove the back cover by pressing down the silver button.
    • Remove the back cover by pressing down the silver button.

    • Pull the cover away from the phone.

    添加评论

  2. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.
    • Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.

    添加评论

    • Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.

    • Our phone is missing the two left screw covers, be careful not to lose yours too!

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four T5 Torx screws that were underneath the rubber covers.

    添加评论

    • Use the plastic opening tool to pry the top cover away from the phone.

    • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

    添加评论

    • Use tweezers to flip up the ZIF tab on the camera ribbon cable socket.

    • Gently pull the camera ribbon cable out of the ZIF socket.

    添加评论

    • Using a pair of tweezers gently grab and remove the camera from the phone.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Christian

于2013年04月18日注册

134 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-46, Amido Spring 2013 Cal Poly, Team 3-46, Amido Spring 2013 的会员

CPSU-AMIDO-S13S3G46

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 15

总计 1,193