跳转到主内容

Motorola Q700 Sidekick Keypad and Front Cover Replacement

你所需要的

  1. Motorola Q700 Sidekick Keypad and Front Cover Replacement, Phone: 步骤 1 中的图像 1,1
    • When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.

  2. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 2 中的图像 1,1
    • Turn the phone face-down. Remove the back cover, exposing the battery.

    • Use the Plastic Opening Tool to pry the battery out of the phone.

  3. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 3 中的图像 1,1
    • Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.

    • Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.

  4. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 4 中的图像 1,1
    • After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.

  5. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 5 中的图像 1,1
    • Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.

  6. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 6 中的图像 1,1
    • On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.

  7. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 7 中的图像 1,1
    • You should now have all of the pieces separated and disassembled for your device.

  8. Motorola Q700 Sidekick Keypad and Front Cover Replacement, Keypad and Front Cover: 步骤 8 中的图像 1,1
    • On the front of the device, pry off the top right, top left, bottom right, and bottom left buttons

  9. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 9 中的图像 1,1
    • On the back of the device unscrew the top right, top left, bottom right, and bottom left buttons using appropriate size Phillips screwdriver

  10. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 10 中的图像 1,1
    • Once screws are dismantled, use plastic opening tool to assist separation of the top half of device from the bottom half

  11. Motorola Q700 Sidekick Keypad and Front Cover Replacement: 步骤 11 中的图像 1,1
    • Unscrew the screws around the keypad and take apart slowly and gently using your hands

结论

To reassemble your device, follow these instructions in reverse order.

Rich

于04/08/13注册

125 声望

创作了6篇指南

团队

SUNY Cortland, Team 1-4, Getto Spring 2013 SUNY Cortland, Team 1-4, Getto Spring 2013 的会员

SUNYCORT-GETTO-S13S1G4

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 2

过去 30 天: 18

总计 426