简介

This guide outlines the steps to disassemble the Q Global to access the internal speakers. It can be used to replace or repair a damaged speaker.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

添加评论

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown. When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

添加评论

Press inwardly on the upper casing until it pops out of the phone.
  • Press inwardly on the upper casing until it pops out of the phone.

添加评论

Slide the upper case rightward and lift up.
  • Slide the upper case rightward and lift up.

  • Lift the camera sticker so that it does not get damaged.

添加评论

Remove the six labeled screws with a T5 torx screw driver. Remove the six labeled screws with a T5 torx screw driver.
  • Remove the six labeled screws with a T5 torx screw driver.

添加评论

Once the screws are removed, use the plastic opening tool to remove the black casing.
  • Once the screws are removed, use the plastic opening tool to remove the black casing.

添加评论

Remove the speakers by using the plastic remover tool.
  • Remove the speakers by using the plastic remover tool.

添加评论

Insert the new speakers by gently pressing them down into place.
  • Insert the new speakers by gently pressing them down into place.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Carlos De La Parra

于2012年10月05日注册

14 信誉积分

撰写一个指南

团队

Cal Poly, Team 6-31, Regan Fall 2012 Cal Poly, Team 6-31, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G31

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 540