跳转到主内容

Motorola Moto X Motherboard Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. Motorola Moto X Motherboard Assembly Replacement, Motherboard Assembly: 步骤 1 中的图像 1,1
    • Remove the five 3 mm T3 Torx screws from the headphone jack/speaker assembly.

  2. Motorola Moto X Motherboard Assembly Replacement: 步骤 2 中的图像 1,3 Motorola Moto X Motherboard Assembly Replacement: 步骤 2 中的图像 2,3 Motorola Moto X Motherboard Assembly Replacement: 步骤 2 中的图像 3,3
    • Insert a spudger under the panhandle of the headphone jack/speaker assembly and pry it up from its recess.

    • Remove the headphone jack/speaker assembly.

  3. Motorola Moto X Motherboard Assembly Replacement: 步骤 3 中的图像 1,2 Motorola Moto X Motherboard Assembly Replacement: 步骤 3 中的图像 2,2
    • Push the tip of a spudger under the microphone assembly clip to free it from the earpiece speaker.

    • If the assembly clip seems to be missing, check the speaker assembly that was removed from the previous step.

  4. Motorola Moto X Motherboard Assembly Replacement: 步骤 4 中的图像 1,2 Motorola Moto X Motherboard Assembly Replacement: 步骤 4 中的图像 2,2
    • Use the flat end of a spudger to free the microphone assembly cable connector.

    • Use tweezers to remove the microphone assembly.

  5. Motorola Moto X Motherboard Assembly Replacement: 步骤 5 中的图像 1,2 Motorola Moto X Motherboard Assembly Replacement: 步骤 5 中的图像 2,2
    • Disconnect the front-facing camera cable connector.

    • Remove the front-facing camera from its recess with a pair of tweezers.

  6. Motorola Moto X Motherboard Assembly Replacement: 步骤 6 中的图像 1,1
    • Remove the final two 3 mm T3 Torx screws from the SIM slot bracket.

  7. Motorola Moto X Motherboard Assembly Replacement: 步骤 7 中的图像 1,1
    • Remove the SIM slot bracket from the motherboard.

  8. Motorola Moto X Motherboard Assembly Replacement: 步骤 8 中的图像 1,2 Motorola Moto X Motherboard Assembly Replacement: 步骤 8 中的图像 2,2
    • Insert the flat end of a spudger under the motherboard above the button assembly cable, and pry it out of the phone.

    • Be careful not to snag any cables.

    • The buttons may pop out of their recesses; take care not to lose them.

  9. Motorola Moto X Motherboard Assembly Replacement: 步骤 9 中的图像 1,2 Motorola Moto X Motherboard Assembly Replacement: 步骤 9 中的图像 2,2
    • Gently lift the motherboard out of the phone, rotating it from the SIM slot edge of the phone.

    • Do not attempt to separate the motherboard entirely; it is still connected to the display by the display cable.

  10. Motorola Moto X Motherboard Assembly Replacement: 步骤 10 中的图像 1,3 Motorola Moto X Motherboard Assembly Replacement: 步骤 10 中的图像 2,3 Motorola Moto X Motherboard Assembly Replacement: 步骤 10 中的图像 3,3
    • Lay the motherboard down to allow access to the display cable connector.

    • Use the flat end of a spudger to flip the retaining tab on the display cable ZIF connector.

    • Carefully pull the display cable out of its connector as you remove the motherboard from the display assembly.

结论

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

于10/18/12注册

465,238 声望

创作了538篇指南

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了16,560篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 91