跳转到主内容

Motorola Moto X 2nd Generation Power and Volume flex cable Replacement

你所需要的

  1. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: 步骤 1 中的图像 1,3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: 步骤 1 中的图像 2,3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement, Power and Volume flex cable: 步骤 1 中的图像 3,3
    • Remove SIM card tray.

  2. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 2 中的图像 1,3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 2 中的图像 2,3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 2 中的图像 3,3
    • Remove back cover.

  3. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 3 中的图像 1,2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 3 中的图像 2,2
    • Remove those two rubber cover.

  4. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 4 中的图像 1,2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 4 中的图像 2,2
    • Release power connecting flex connector and battery connector.

  5. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 5 中的图像 1,2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 5 中的图像 2,2
    • Twist off all 18 black torx screws and remove the middle housing from front assembly.

  6. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 6 中的图像 1,2 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 6 中的图像 2,2
    • Release power flex connector from connecting flex.

  7. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 7 中的图像 1,3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 7 中的图像 2,3 Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 7 中的图像 3,3
    • Remove securing bracket and side buttons.

  8. Motorola Moto X 2nd Generation Power and Volume flex cable Replacement: 步骤 8 中的图像 1,1
    • Pry up and remove the power flex.

结论

To reassemble your device, follow these instructions in reverse order.

10等其他人完成本指南。

Sophia

于03/25/14注册

43,822 声望

创作了62篇指南

3条评论

Followed your instructions. Volume works, power button still no go.

It clicks fine, but nothing happens..

Carlo Petermann - 回复

I have the same issue. Any ideas? Resolutions?

sagar bhale -

The screwdriver is T4 on my european moto X 2014, not T3!!

Clément Masci - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 2

过去 30 天: 5

总计 5,111