跳转到主内容

你所需要的

  1. Motorola Moto X 2nd Generation Logo Replacement, Logo: 步骤 1 中的图像 1,3 Motorola Moto X 2nd Generation Logo Replacement, Logo: 步骤 1 中的图像 2,3 Motorola Moto X 2nd Generation Logo Replacement, Logo: 步骤 1 中的图像 3,3
    • Remove SIM card tray.

  2. Motorola Moto X 2nd Generation Logo Replacement: 步骤 2 中的图像 1,2 Motorola Moto X 2nd Generation Logo Replacement: 步骤 2 中的图像 2,2
    • Use the eject pin to open a gap and place a guitar pick into the gap.

  3. Motorola Moto X 2nd Generation Logo Replacement: 步骤 3 中的图像 1,2 Motorola Moto X 2nd Generation Logo Replacement: 步骤 3 中的图像 2,2
    • Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.

  4. Motorola Moto X 2nd Generation Logo Replacement: 步骤 4 中的图像 1,3 Motorola Moto X 2nd Generation Logo Replacement: 步骤 4 中的图像 2,3 Motorola Moto X 2nd Generation Logo Replacement: 步骤 4 中的图像 3,3
    • Twist off three screws, pry up the securing bracket and remove the logo finally.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Sophia

于2014年03月25日注册

43,672 声望

创作了62篇指南

2条评论

So apparently, this phone was supposed to have a fingerprint scanner. To anyone who has done this repair, I'm sure you're as confused as me as to why there is a flex cable leading to the "M" logo with nothing attached. My though is that's where the scanner was going to go, and it just never happened, which also explains why the iconic Motorola M dimple is a separate part, compared to the old Moto X and the Gs and Es, which was part of the back plastic cover.

Jeff Caauwe - 回复

Where can you get the replacement part? I'm finding it difficult.

Niall Murray - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 2

过去 30 天: 5

总计 2,425