简介

Follow this guide to replace a scratched or worn back cover for the Motorola Moto G5.

配件

无需配件。

  1. Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.
    • Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.

    • Pry with your fingernail or twist the spudger to release the back cover from the phone.

    添加评论

  2. Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.
    • Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.

    添加评论

    • Continue sliding the flat end of the spudger along the seam for the remaining sides of the phone.

    添加评论

    • Lift the back cover and remove it from the phone.

    • To reinstall the back cover, align the cover with the phone and squeeze along the edges to snap the clips back into place.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Check out our Motorola Moto G5 Answers community for troubleshooting help.

Arthur Shi

于2018年01月03日注册

26,052 信誉积分

创作了92篇指南

团队

iFixit iFixit 的会员

Community

114 名成员

创作了6,980篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 18

过去的30天: 151

总计 359