Motorola Moto E6 Speaker Replacement

简介

The speaker in the Motorola Moto E6 can be replaced by following this guide. The speaker should be replaced if it is visually damaged or if it fails to produce sound. The speaker should also be replaced if the user notices a lack of volume or pitch of the sound coming from the speaker.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

你所需要的

步骤 1 Back Cover

Motorola Moto E6 Speaker Replacement, Back Cover: 步骤 1 中的图像 1，2

Motorola Moto E6 Speaker Replacement, Back Cover: 步骤 1 中的图像 2，2

Begin by prying open the bottom right of the device using the plastic opening tool.
Work your way around the edge of the device, slowly prying open the casing until it pops off.

编辑

步骤 2 Battery

Motorola Moto E6 Speaker Replacement, Battery: 步骤 2 中的图像 1，1

Use the opening tool on the divot located below the battery to pop it out.

编辑

步骤 3 Speaker

Motorola Moto E6 Speaker Replacement, Speaker: 步骤 3 中的图像 1，1

Remove the eleven 3.8 mm T4 Torx screws located above the battery compartment.

编辑

步骤 4

Use the plastic opening tools to pry open the piece located at the top of the device.
Start by prying open the side of the compartment and work your way towards the camera module, prying open the compartment as you go.
Pop off the piece above the battery compartment.

编辑

步骤 5

Motorola Moto E6 Speaker Replacement: 步骤 5 中的图像 3，3

Using tweezers, lift the speaker from the motherboard located at the top of the device.
When replacing with a new component, make sure the clips are facing towards the user.

编辑