跳转到主内容

简介

Changing the wrist strap may be easier if the rear cover is taken off first, but removing the rear cover is not required and risks damage to the rear of your device.

配件

没有特定配件。

  1. Locate the spring-loaded pin that attaches the wrist strap to the watch.
    • Locate the spring-loaded pin that attaches the wrist strap to the watch.

    • There is a tiny groove on the end of the pin. This is where you will place the tweezers.

  2. Take care not to lose the spring-loaded pin when removing the strap.
    • Take care not to lose the spring-loaded pin when removing the strap.

    • Use the tweezers to compress the spring-loaded pin so the strap can be removed.

  3. Pull the wristband away from the watch face. Pull the wristband away from the watch face.
    • Pull the wristband away from the watch face.

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

Steven Tan

于2015年01月30日注册

293 信誉积分

撰写一个指南

团队

Cal Poly, Team 17-32, Amido Winter 2015 Cal Poly, Team 17-32, Amido Winter 2015 的会员

CPSU-AMIDO-W15S17G32

4 名成员

创作了18篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 16

总计 3,539