修复你的物品 社区 商店

Motorola Moto 360 3rd Gen Lower Case Replacement

简介

Use this guide to replace the lower case on your Motorola Moto 360 3rd Gen smartwatch.

你所需要的

  1. Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: 步骤 1 中的图像 1，2 Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: 步骤 1 中的图像 2，2

    • Use a T4 Torx screwdriver to remove the four 4.2 mm screws securing the lower case.

    • Gently pry the case open with a halberd spudger if the case will not release after removing the bolts.

    • Do not remove the lower case completely yet; this could damage cables connected to the lower case.

    编辑

  3. Motorola Moto 360 3rd Gen Lower Case Replacement: 步骤 2 中的图像 1，1

    • Raise the cover without straining the connected ribbon cable.

    • Disconnect the ribbon cable from the motherboard with a halberd spudger.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

Connor Bassolino

于03/29/22注册

6,658 声望

创作了28篇指南

徽章: 24

+ 21更多徽章

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了17,430篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 58